|
|
|
|
|
|
|
|
 |
 |
 |  |
 |
English |  |
|
|
|||||||||||
Weight Integration Features Loading Weight into the SureLock™ Pouches Aqua Lung recommends that each pouch is loaded with equal amounts of weight for optimum balance, preventing the tendency to roll to one side during the dive. Also, it is strongly recommended that each weight pouch is fully loaded with two separate weight blocks for the standard pouch, or four separate blocks for the large pouch. For example, if you want to load a standard pouch with 6 pounds, use two separate 3 pound blocks (see step 2, next page); if you want to load a large weight pouch with 12 pounds, use four separate 3 pound blocks. |
|||||||||||
Loading Weight In The Standard Size SureLock™ Weight Pouches |
|||||||||||
Lift up each pouch’s flap (a), and lay it back over the handle (b). While holding the pouch fully open, insert the weight and then close the flap. When each pouch has been loaded with weight, firmly run your hand over the flaps to securely fasten the hook & loop (c). |
 |
||||||||||
Loading Weight In The Large Size SureLock Weight Pouches |
|||||||||||
The procedure for loading the large weight pouch is the same as the standard pouch, except that the large weight pouch has an upper and lower weight compartment. Aqua Lung recommends that the pouches be completely filled with four separate weight blocks (two per compartment); however, if you need to partially fill the pouch, load the bottom compartment first. Use the diagram below for proper weight placement. (This diagram is also sewn on the weight pouch flap.) |
 |
||||||||||
|
|||||||||||
|
|||||||||||
